The WMI are flush mountable Wall Microphone Input Units, which can be integrated into several kinds of installation materials for system integration. They are fitted with a Female XLR input connector on the front side and a terminal block connector on the rear side. The signal which is applied to the input connection is converted to a differential signal with increased voltage levels. This way, the signal is made insensitive to interference and noise and can be transferred over a long distance without any loss of quality. This allows reliable signal transmission up to 300 meters over CAT5E (or better) twisted pair cabling. A jumper on the rear side allows enabling of 15 Volts phantom power. It should be used in combination with a matching device on the receiver end.
| WMI18/W | Wall microphone input unit (45 x 45 mm) |
| Inputs | Connector | XLR female connector |
| Outputs | Type | 4-pin Euro Terminal Block (Pitch - 3.81 mm) |
| Signal | Mono audio transfer | |
| Level | Differential with increased Voltage levels | |
| Cabling | UTP CAT5E (or better) | |
| Max. cable length | 11811.024 " | |
| Power | Consumption | 0.95 W - 40 mA / 24 V |
| Phantom Power | 12 V DC | |
| Dimensions | 1.77 x 1.77 x 1.97 " (W x H x D) | |
| Construction | ABS | |
| Mounting | 45 x 45 mm | |
| Colours | Black (RAL9005) (WMI18/B) | |
| White (RAL9010) (WMI18/W) | ||
| Accessories | Optional | CP45CF1 Cover frame |
| CP45CF2 Cover frame | ||
|
Bars & Restaurants
|
|
Retail
|
|
Hotels
|
|
Corporate
|
|
Residential
|
Cover frame single 45 x 45 mm with hooks
Cover frame double 45 x 45 mm with hooks
Cover frame single 45 x 45 mm
Cover frame double 45 x 45 mm
Flush mount box for wall panel - Hollow wall
Flush mount box for double 45 x 45 mm wall panel - Hollow wall
4-zone audio matrix
8-zone audio matrix
Active audio transceivers RCA
