• AMP20 - Mini stereo amplifier 2 x 15W

AMP20

DiscontinuedMini stereo amplifier 2 x 15W
Replaced by AMP22
  • Balanced stereo line input
  • 1 x Microphone input
  • Stereo & bridged mode
  • Energy-star certified (version 3.0)
  • Standby energy saving mode
  • Compact design
  • Remote wall mixer & volume controller option
5 years
Energy Star
Where to buy?

The AMP20 is a mini stereo power amplifier with a power rating of 2 x 15 Watt, that lends itself perfectly to small speaker systems requiring compact and economical audio solutions. It offers the ideal solution for applications such as class rooms, offices and meeting rooms where only a small amount of speakers are required. The compact size and very high efficiency makes it perfectly suited to be hidden in a closet, on a false ceiling or mounted under a desk or table. The combination of the stereo balanced line, with microphone input, makes it perfectly suited for applications where it should be used in combination with projection screens and video sources while a microphone is connected. Two gain potentiometers make it possible to control the sensitivity and balance between music and speech, while a switch allows bridging of the output channels to obtain one channel with merged output power. A remote wall mixer can be connected for applications where local mixing for the inputs is desirable, while large distances can be covered between the source and amplifier using simple CAT5 twisted pair cabling. The volume controller input allows connection of an additional wall controller for overall volume control. The Class-D amplifier technology, standby mode and included switching power supply makes this device compliant to the highest energy efficiency and environmental requirements. A variety of optionally available mounting brackets for the AUDAC S-Box product range are allowing desk, closet or 19” equipment rack installation.

Microphone & line mixing / gain controls
Energy star certified
Stereo, parallel & bridged mode
S-box™ multifunctional enclosure
24V power input
Balanced stereo line input
Balanced microphone input
Remote wall mixer & volume controller connection
AMP20 - Mini stereo amplifier 2 x 15W

Technical specifications

System specifications
RMS/AES power handling @ 4 Ω Stereo 2 x 15 W
@ 8 Ω Stereo 2 x 7.5 W
@ 8 Ω Bridge 30 W
Inputs Balanced Stereo Type 1 x Stereo Balanced Line
Connector 2 x 3-pin Euro Terminal Block (Pitch - 0.15 ")
Impedance 20 kΩ
Sensitivity -12 dBV ~ +12 dBV
Balanced Microphone Type 1 x Balanced Microphone
Connector 3-pin Euro Terminal Block (Pitch - 3.81 mm)
Impedance 47 kΩ
Sensitivity -50 dBV ~ -18 dBV
Other Connector RJ45
Type 1 x Remote Volume controller
Connector RJ45
Outputs Type 1 x Stereo Loudspeaker
Connector 4-pin Euro Terminal Block (Pitch - 5.08 mm)
THD+N (@ 1 kHz) < 0.1%
Crosstalk (@ 1 kHz) < -75 dB
Signal / Noise > 95 dB
Power Consumption Standby 0.8 W (PSD241 included)
Supply 24V DC (PSD241 switching Power supply included 100 ~ 240V AC / 47 ~ 63 Hz)
Efficiency 87%
Cooling Convection cooled
Protection Over heating
Over load
DC Short circuit
Signal limiting
Energy certification Energy Star 3.0
Product Features
Dimensions 4.25 x 1.73 x 6.50 " (W x H x D)
Weight 1.76 lb
Accessories Included PSD241 - Power supply 24V / 1.67 A (Efficiency Level V)
Optional VC3208 Remote volume controller
WP523 Remote wall mixer
MBS1xx Optional Wall mounting brackets
TR3030 100V Transformer 30 W
Recommended applications
Bars & Restaurants
Education
Corporate
Residential

Peripheral device compatibility table

M2 R2 MTX AMP523MK2 APG20 LX523 ARU1xx AMP20
WLI checkmark checkmark checkmark
WMI checkmark checkmark checkmark
DW506x checkmark checkmark
DW30/40x checkmark checkmark
MWX65 checkmark
MWX4x checkmark checkmark
APM1xx checkmark checkmark checkmark checkmark
WP523 checkmark checkmark
MPX48/88 checkmark
ARU1xx checkmark checkmark checkmark

FAQ

Answer

As the power consumption of an amplifier, strongly depends on how hard the amplifier is driven, measurements are provided for various loads: idle, 1/8 of average full power, 1/3 of average full power, and full power.

Idle 
Current draw at idle or with very low signal level

1/8 Power: Pink Noise
Amplifiers are tested using pink noise signals to simulate real-world speech and music signals.  It approximates operating with music or voice with light clipping and represents the amplifier's typical "clean" maximum level, without audible clipping. This 1/8 power signal provides a very good approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven as loud as possible without clipping the amplifier.

1/3 Power: Pink Noise
1/3 Power Pink Noise is similar to 1/8 Power Pink Noise, except that it is a significantly more powerful input signal. It approximates operating with music or voice with very heavy clipping and a very compressed dynamic range. This 1/3 power signal provides an approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven loud enough to clip the amplifier heavily, and produce severe, audible distortion.

Full Power
Current draw at full power is measured with a sine wave at its maximum possible level. However, it does not represent any real-world operating condition and represents the absolute extremes that an amplifier could ever experience.
 

Answer

Heat dissipation is the process by which electronic devices like amplifiers and processors release the heat they generate during operation to prevent overheating. This data is important because it ensures devices perform efficiently, last longer, and are safe to use. To calculate heat dissipation, you measure the device's power consumption (in watts) and use the thermal resistance (how well the device transfers heat) to determine how much heat needs to be managed. This information helps design proper cooling systems, ensuring the device remains within safe temperature limits.

The heat dissipation list for all Audac devices is in the link below.

AUDAC Devices Heat Dissipation

Downloads

Information sheets other languages

Stay up to date with our activities

Latest news and case studies

Support

Just a click away.
Don't hesitate to contact us.

Contact us
Top