• AMP203 - Dante™/AES67 mini stereo amplifier
  • AMP203 - Dante™/AES67 mini stereo amplifier
  • AMP203 - Dante™/AES67 mini stereo amplifier
  • AMP203 - Dante™/AES67 mini stereo amplifier

AMP203

Dante™/AES67 mini stereo amplifier
  • Compatible with AUDAC Touch™
  • Compatible with TouchLink™
  • Advanced DSP and loudspeaker management
  • Unbalanced stereo line output (3-pin terminal block)
  • Dante™/AES67 digital audio input
  • PoE 802.3bt (and lower) compatible
  • Ethernet & RS-485 control possibilities
5 years
Dante™ Domain Manager Ready
Dante™/AES67
Where to buy?

The AMP203 is a revolutionary mini stereo amplifier, featuring network input through Dante™ or AES67 providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency while allowing all other data to be connected on the same network.

Various DSP functionalities are implemented in the AMP203. This allows all configurations to be made in AUDAC Touch™ 2 or via RS485 and Ethernet, making it a fully-fletched 2 x 30W amplifier. The output connector has been implemented using a 4-pin terminal block connector, featuring an output power of 30W per channel and 60W when bridged.

The 3-pin terminal block stereo line output connector gives the option of looping the AMP203 to the next amplifier.

Using PoE (Power over Ethernet) this extremely power-efficient amplifier receives both power and signal through a single networking cable, this way flexibility is maximized while needed cabling is kept at a minimum.

The compact convection cooled enclosure eliminates any humm or buzz otherwise caused by a fan. Various optional mounting brackets are available like the MBS1xx series, which allow it to be mounted under a desk, in a closet, on the wall, on top of a dropped ceiling or to a 19" equipment rack. This proves that the AMP203 is the perfect solution for compact to medium-sized applications in corporate, hospitality or retail environments.

Decentralize your system

Thanks to the multifunctional use of the AMP203 in combination with the AUDAC Touch™ application it is possible to create a decentralized multi-zone system. By simply connecting the AMP203 to the local network and connecting the loudspeakers, a new zone can be introduced to your system.

Compatible with AUDAC Touch™ 2
Compatible with TouchLink™
PoE 802.3bt (and lower) compatible
Dante & AES67 digital audio input
Ethernet & RS485 control possibilities
Create a decentralized multi-zone system
3-pin terminal block stereo line output connector
AMP203 - Dante™/AES67 mini stereo amplifier
TouchLink™ compatible
Decentralize your audio solutions

TouchLink™ compatible

TouchLink™ is an ingenious system that can be used for creating virtual zones by linking multiple TouchLink™ compatible devices with each other. In AUDAC Touch™ you can select multiple devices or amplifier channels that should react to the user as one zone.

AUDAC Touch™ compatible
Decentralize your audio solutions

AUDAC Touch™ compatible

Once connected to the network, AUDAC Touch™ will automatically discover your new device and allows you to get a complete overview of your entire installation. Thanks to the innovative app you can easily control each zone separately from the palm of your hand.

Technical specifications

System specifications
RMS/AES power handling @ 2 Ω Bridge 1 x 60 W
@ 4 Ω Stereo 2 x 30 W
@ 4 Ω Bridge 1 x 60 W
@ 8 Ω Stereo 2 x 30 W
@ 8 Ω Bridge 1 x 30 W
THD+N (@ 1 kHz) < 0.015%
Crosstalk (@ 1 kHz) < -98 dB
Efficiency > 70%
Cooling Convection cooled
Control RS-485
TCP/IP
Power PoE 802.3bt
Supply 24 V DC
Inputs Other Type 1 x Ethernet
RS-485
Dante™/AES67 (4 channels)
Connector RJ45
Protection Over heating
Over load
DC Short circuit
Signal limiting
Outputs Type 1 x Stereo Loudspeaker
1 x Line output
Connector 4-pin Euro Terminal Block (Pitch - 5.08 mm)
3-pin Euro Terminal Block (Pitch - 3.81 mm)
Power Consumption 80 W (max.)
Nominal (1/8 MUP) 10.6 W
Standby 3 W
Idle 6.6 W
Product Features
Dimensions 4.25 x 1.73 x 6.50 " (W x H x D)
Weight 1.54 lb
Recommended applications
Bars & Restaurants
Education
Corporate
Retail
Residential

Example setups

Atellio family example setups

FAQ

Answer

To control the AMP203 with Audac Touch 2.0, the system uses multicast UDP packets to communicate. Depending on your set-up this throughput speed can be limited on WiFi networks.

To solve this network limitation you can configure a multicast to unicast translation on your access point.

Answer

As the power consumption of an amplifier, strongly depends on how hard the amplifier is driven, measurements are provided for various loads: idle, 1/8 of average full power, 1/3 of average full power, and full power.

Idle 
Current draw at idle or with very low signal level

1/8 Power: Pink Noise
Amplifiers are tested using pink noise signals to simulate real-world speech and music signals.  It approximates operating with music or voice with light clipping and represents the amplifier's typical "clean" maximum level, without audible clipping. This 1/8 power signal provides a very good approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven as loud as possible without clipping the amplifier.

1/3 Power: Pink Noise
1/3 Power Pink Noise is similar to 1/8 Power Pink Noise, except that it is a significantly more powerful input signal. It approximates operating with music or voice with very heavy clipping and a very compressed dynamic range. This 1/3 power signal provides an approximation of how hard an amplifier would be driven by typical real-world speech/music signals, assuming those signals were being driven loud enough to clip the amplifier heavily, and produce severe, audible distortion.

Full Power
Current draw at full power is measured with a sine wave at its maximum possible level. However, it does not represent any real-world operating condition and represents the absolute extremes that an amplifier could ever experience.
 

Downloads

Information sheets

Education

The AUDAC Education Platform lets you feel like you are participating in a real life innovative sound training hosted by one of our AUDAC specialists.

Visit AUDAC Education Platform to learn more
Stay up to date with our activities

Latest news and case studies

Support

Just a click away.
Don't hesitate to contact us.

Contact us
Top