The T2 is a professional power amplifier which can deliver a power up to 2 x 300 Watt @ 4 Ohm + 600 Watt (sub) @ 8 Ohm only, and is suitable for most common low impedance high power sound systems. The T series are designed as no-nonsense amplifiers with only the necessary controls and connectors. This creates great simplicity in use and installation. They are built as 2 channel amplifiers with an additional channel to power a passive subwoofer cabinet. Each input is fitted with a knob to set the cross-over frequency, with a range between 50Hz and 250Hz, to determine the signal for the subwoofer channel. They also contain a built-in limiter and a multipurpose protection circuit. The protection circuit detects DC malfunction, short circuit, overheating, overload and limits the signal when necessary. On the front of the amplifier, the volume of each channel can be set by an individual volume control, along with the signal, clip and protection indicator LED’s. Each channel is fitted with a balanced XLR input connector and a speakon output connector. The steel 19" housing has a height of 2 HE.
| RMS/AES power handling | Satellite | @ 4 Ω Stereo | 2 x 300 W |
| Subwoofer | @ 8 Ω | 600 W | |
| Inputs | Impedance | 20 kΩ balanced | |
| 10 kΩ Unbalanced | |||
| Sense | 0.775 V | ||
| Frequency | Response (± 3 dB) | 20 Hz - 20 kHz | |
| THD+N (@ 1 kHz) | @ 8 Ω | < 0.05% | |
| Signal / Noise | ≥ 93 dB | ||
| Slew rate | 40 V / ÎĽSec | ||
| Damping factor | > 400 | ||
| Crosstalk (@ 1 kHz) | @ 8 Ω | > 70 dB | |
| Protection | DC Short circuit | ||
| Over heating | |||
| Over load | |||
| Signal limiting | |||
| Power | Supply | 240 V AC / 50 - 60 Hz | |
| RMS/AES power handling | @ 8 Ω Stereo | 2 x 200 W | |
| Dimensions | 18.98 x 3.46 x 18.11 " (W x H x D) |
| Weight | 52.89 lb |
| Mounting | 19” |
| Unit height | 2 HE |
| Construction | Steel |
| Colours | Black |
