New Atellio family firmware & AUDAC Touch 2.13 update
We have released exciting new firmware updates
We're thrilled to share the latest firmware updates for our Atellio products, including the LUNA Series, NCP105, and NWP, along with the latest version of AUDAC Touch™. These updates bring a host of new features and improvements designed to enhance your experience and the functionality of our devices.
LUNA Series Firmware Update 1.6.0
Highlights:
- Gain Shared Automixer
- Gated Automixer
- AEC
New Features (in combination with AUDAC Touch™ version 2.13.0):
- Device name visible on the LCD display.
- UP/DOWN/TOGGLE commands added to ASCII commands.
- ASCII commands that relate to a number (like the MIXER, ROUTE, VOLUME) now allow you to increment or decrement the current value.
- ASCII commands that relate to a boolean (like the MUTE command) now have a third option to toggle the value.
More info: LUNA Command Manual
Improvements:
- Additional features cannot be enabled when DSP load is too high.
- Additional time zones added.
- Support of link-local addresses.
Bug Fixes:
- Licenses are not lost anymore after a file system update.
- A new snapshot cannot be triggered while loading a big snapshot.
- Loading big snapshots could temporarily block communication.
- When a 32-channel Brooklyn module is installed, the input and output names of channels 33 to 64 are no longer set.
Known Issues:
- Licenses require an internet connection: Devices that use licenses must be connected to the internet.
- Device address change requires Event handler sync: After changing the device address, one event needs to be updated and saved to sync the device address in the Event handler.
- OTA update with USB inserted: When updating via OTA while a USB with update files is inserted, the files on the USB will be used instead of those downloaded via OTA. Make sure to update via either USB or OTA—do not combine both methods.
NCP105 Firmware Update 1.2.1
New Features (in combination with AUDAC Touch™ version 2.13.0):
- Legacy device support (MTX48/88, M2, MFA208/216, AMP523, AMP203, VEXO, SMA/Q, PMA/Q).
- Improved status displays.
- Button LEDs with layer indication.
- Multiple LED ring indications: Volume/Mute/Route of a zone controlled by rotary will be shown on the LED ring.
- Rotary volume control: Volume is shown continuously; routing is shown temporarily when changed.
- Rotary volume control: If a zone is muted, the LED ring shows red; when unmuted, it shows volume.
- Rotary routing control: Routing is shown continuously; volume is shown temporarily when changed.
- Identify functionality: LED ring blinks for 10 seconds when the Identify button is pressed in the AUDAC Touch™ device list.
NWP Firmware Update 1.3.0
Bug Fixes:
- Pre-gain value not correct after reboot.
How to Update: You can easily perform these updates over-the-air either directly on the device using the interface or through AUDAC Touch™ when on the same network.