CEP series

Energy-efficient power amplifiers.

Professional 70/100V multi-channel highly energy-efficient amplifiers. These amplifiers deliver an uncompromised sound experience in the most effective way.

  • CEP408 - Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V
  • CEP408 - Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V
  • CEP408 - Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V
  • CEP408 - Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V

CEP408

Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V
  • Energy star certified
  • Terminal block input connections
  • Terminal block output connections
  • Input linking through miniature switches
  • Compact and lightweight design
  • Class-D amplifier technology
5 years
Energy Star
Where to buy?

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.

The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.

The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.

Compact and lightweight design
Class-D amplifier technology
Passively cooled housing
Energy star compliant
Balanced input connections (3-pin terminal block)
Low impedance & constant voltage output
CEP408 - Quad channel 4 Ohm energy-efficient amplifier - 4 x 80W - 70/100V
Same power, less energy usage
ENERGY STAR certified

Same power, less energy usage

These multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode'.

Silent passive cooling
A quiet solution

Silent passive cooling

In order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs

Uncompromised sound experience
User-friendly setup

Uncompromised sound experience

The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.

Amplification for any application
Many different applications

Amplification for any application

These both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

Technical specifications

System specifications
RMS/AES power handling 4 x 80 W
@ 70 V 4 x 80 W
@ 100 V 4 x 80 W
Outputs Connector 4-pin Euro Terminal Block (Pitch - 5.08 mm)
Inputs Connector 3-pin Euro Terminal Block (Pitch - 3.81 mm)
Power Supply 100 ~ 240V AC mains operation voltage
Signal / Noise > 100 dB
THD+N (@ 1 kHz) < 0.05% (1/8 rated Power)
Crosstalk (@ 1 kHz) < 70 dB
Technology Class-D
Protection DC Short circuit
Over heating
Over load
Signal limiting
Cooling Convection cooled
Operating temperature 0° ~ 40° @ 95% Humidity
Frequency Response (± 3 dB) 110 Hz - 20 kHz
Power Supply Switching mode
Source 100 ~ 240 V AC / 50 ~ 60 Hz
Consumption Standby 0.6 W
Idle 16.4 W
Nominal (1/3 MUP) 196 W
Nominal (1/8 MUP) 92 W
Inputs Sensitivity -0.5 dB ~ 10.5 dB
Impedance 10 kΩ balanced
Connector 3-pin Euro Terminal Block (Pitch - 3.81 mm)
IEC C14 Connector
Input linking through miniature switches
Outputs Voltage / Impedance 4 Ω
70 V / 62.5 Ω
100 V / 125 Ω
Product Features
Mounting 19”
Unit height 1 HE
Colours Black
Dimensions 18.98 x 1.73 x 13.98 " (W x H x D)
Weight 13.89 lb
Construction Steel
Recommended applications
Bars & Restaurants
Corporate
Education
Retail

Downloads

Information sheets

Stay up to date with our activities

Latest news and case studies

Support

Just a click away.
Don't hesitate to contact us.

Contact us
Top